Getting My h4831sc load data To Work
Getting My h4831sc load data To Work
Blog Article
That is purported to be the "drop by" powder-or darn near it- for just about any bottle-necked cartridge a person could handload. It really is the muse for numerous pet loads, but I haven't been satisfied with the outcome.
Ballistically, Hodgdon H4831 SC Powder is the exact duplicate of H4831. Physically, it's got a shorter grain size, hence, the designation SC or small Lower. The shorter, much more compact kernels enable the powder to circulation through the powder actions more easily, assisting to alleviate the consistent reducing of granules.
The obvious cause is often a tough/ruff bore. No level of copper fouling lessening agents while in the powder will suitable this.
Warning using SC or SSC developed loads with prolonged Slash, back off and operate up. Use safe loading strategies.
My encounter would be that the SC and SSC loaded to a similar body weight as being the long Slash demonstrates a reduced velocity.
I have utilised H4831 and H4831SC in my 260 Rem without variation. The one thing is definitely the brief Minimize will give you a little more space. Excellent luck!gun)
If there is absolutely no load data it truly is for the reason that this powder isn't appropriate for this cartridge. Commonly one is not going to uncover just one powder to suit all cartridges, and the family members of cartridges with the particular powder (4831SC) that you will be inquiring about will not function.
If you've got h4831sc load data some heavier .224" bullets, you might find a load that actually works Okay Together with the 4831. The bullets I tried that were above 70 grains wouldn't stabilize in my rifle, which experienced the typical 14" twist. The 70-grain Speer was the h4831 vs h4831sc largest bullet that will stabilize, but it did that wonderfully. It is a funny-looking bullet which has a rounded nose profile, but it surely shoots wonderful and kills well. Deer out to about 150 yards al went down instantly with rib-cage hits.
Any load data to support that? My to start with assumed is it's actually not gonna burn all the way and velocities are going to be sluggish and everywhere. Could be a good fireworks Show!
Liberalism; The difficult nonetheless recognized Idea that it's fully doable to choose up a turd with the clear conclude.
Run your load up with the precise powder (sc or frequent) and large amount that you are applying nevertheless. Similar burn off charge doesn't mean it will behave "exactly" a similar. I have observed more than a hundred fps difference between sc and mil-surp plenty of H4831.
It has been a little bit, but I did get some 4831 SC to test. Discovered a node and shot some teams. I shot a .six five shot team these days. It is really somewhat slower than H1000, but shoots good. Thanks for the recommendation, It is fantastic to h4831sc understand that I have bought possibilities when one or another powder is dried up.
Can I think that H4831 could be substituted for H4831sc ? I'm sure the physical variance but will it impact the burn off or velocity? I do think not but I'm not one hundred% guaranteed.
I discovered that my 7mag 160 partitions were being sub MOA with 4831sc with very low to min fees. I’m talking 2700 (it's possible 2800) fps, it had been a reduced 60s grain demand in the Norma case. Not what I used to be trying to find, but accurate Even so.